The Subsurface LD-15 Leak Detector contains a high sensitivity sensor with an extra strong neodymium magnet. To protect the sensor and cable connection the device is completely sealed. In fact it boasts an IP68 environmental rating. This is not the leak detector that is going to be damaged by dust or water. It is completely sealed and water-proof, you could even submerse the leak detector in water. With an on-board amplifier, you get superior audio quality with very low distortion and a superior signal-to-noise ratio. The large meter display shows the intensity of the sound right on the device. You can always be assured that you ears are telling the truth. You can visually confirm the sound you are hearing. “Survey” for water leaks by listening at hydrants and valves with the sensor and magnet, you can check the condition of pipes before anything happens. Even survey at water meters with the optional long contact rods. “Pinpoint” water leaks in pipes under asphalt or concrete with the base plate attached to the sensor and magnet. Use the High filter range for water leak surveying. Use the Low filter range for water leak pinpointing. High frequency leak sounds travel on the pipes, but only low frequencies pass through the soil.
- Simple and quick way of surveying for water leaks.
- High sensitive sensor, extra strong and water proof(submersible)
- Survey for leaks at hydrants, valves and meters.
- Use the High filter range for water leak surveying. Use the Low filter range for water leak pinpointing.
There are no reviews yet.